Pistola De Calor 1800 W Kit De Pistola De Aire Caliente De Servicio Pesado 752℉

Description

SEEKONE Heat Gun 1800W Heavy Duty Hot Air Gun Kit with 752℉&1112℉ Dual-Temperature Settings and 4 Nozzles for Crafts, Shrinking PVC, Stripping Paint
►【Fuerte potencia con 2 modos】 La pistola de calor Seekone proporciona una fuerte potencia para calentar rápidamente en segundos. El motor de 1800 W genera suficiente aire caliente para casi cualquier proyecto, hay dos modos: I: 752.0 °F, 250 L/min; II: 1,112.0 °F, 500 L/min.
►【Ajustes de temperatura alta y baja】Puedes cambiar la temperatura entre el ajuste bajo de 752℉ (752.0 °F) y alto de 1112℉ (1,112.0 °F) con un solo toque de un botón para ayudar fácilmente a completar las tareas de mejora del hogar. Opción de doble temperatura para satisfacer diferentes necesidades en tu proyecto.
Diseño ergonómico científico y amplias aplicaciones: la pistola de calor Seekone tiene un mango de diseño ergonómico científico que puede evitar lesiones por esfuerzo repetitivo. Uso ideal para encoger tubos termorretráctiles, envoltura de encogimiento, calefacción de PVC, electrónica, reparaciones de teléfonos móviles, envoltura de vinilo, quitar pintura o azulejos de piso, aflojar pernos oxidados y otros propósitos de calefacción o descongelación.
►【Cuatro boquillas accesorios】La boquilla del deflector dirige un patrón de calor largo y estrecho a la superficie de trabajo; dos boquillas concentradoras dirigen un flujo de calor concentrado a la superficie de trabajo; la boquilla del reflector dispersa el flujo de calor uniformemente alrededor de toda la superficie de trabajo. (Nota: el calor soplado es altamente concentrado, no utilices la boquilla durante mucho tiempo)
Lo que obtienes: 1 pistola de calor de 1800 W, 4 boquillas, 1 manual de usuario (idioma español no garantizado). Cualquier cosa que ocurra sobre el producto, por favor no dude en ponerse en contacto con nosotros en cualquier momento, estaremos siempre aquí para usted.
Product Description
What You Get
1 x 1800W Heat Gun
4 x Nozzles
1 x User Manual
Note：
When the internal temperature of the heat gun is too high,the heat gun will start the overheat protection mode, automatically stopping the heating and restarting the heating when temperature returns normal.
The heating coil will glow, and may emit some smoke, this is because the new coil has a thin coating of antirust, and smoke will dissipate quickly. After using several times, the front tube will become darker, which is normal due to the high cycles.
Specification
Strong power: 1800W
Input: 110V, 50Hz
Dual Temperature Setting : 400℃(752℉)/ 600℃(1112℉)
Dual Airflow Setting: Low: 250L/min High: 500L/min
Cable Length :1.4m (4.6ft)
Weight: 0.9kg (1.984lb)
Bending Pipes
Using the heat gun you can bend a piece of PVC pipe at just about any angle without using any adhesives or elbow joints. Not only convenient but also dramatically speeds up the job.
Removing Rusted Bolts
Heat the nut with a heat gun if it won't come off. This causes the steel to expand, which can break the rust seal. Apply heat for about a minute, then allow the nut to cool.
Floor Tile Replacement
You can use the heat gun to remove glued floor tiles, just apply heat to the tiles to soften the glue underneath. Then pry the tile to produce a gap. Be sure to move the heat gun back and forth to prevent localized overheating.
Shrink Packaging Film
It's an practical tool that every mechanic should have in their tool box. You can use this heat gun to shrink the film easily. Start from a distance and gradually move closer to the contracting film until the desired effect is achieved.
►【Strong Power With 2 Modes】 SEEKONE heat gun provides strong power to quickly heat up in seconds.The 1800W motor generates enough hot air for almost any project, there are two modes: I: 400℃, 250L/min; II: 600℃, 500L/min.
►【High and Low Temperature Settings】 You can switch the temperature between the low setting of 752℉(400℃）and high of 1112℉ (600℃） with a single push of a button to easily help complete household home improvement tasks. Dual temperature option to meet different needs in your project.
▶ 【Scientific Ergonomic Design & Wide Applications】SEEKONE heat gun has a scientific ergonomic design handle can prevent repetitive strain injuries.Ideal use for shrinking heat shrink tube, shrinking wrap, heating PVC, electronics, cell phone repairs, vinyl wrap, removing paint or floor tiles, loosening rusted bolts, and other heating or thawing purpose.
►【Four Nozzles Accessories】Deflector nozzle directs a long, narrow heat pattern to the work surface; Two concentrator nozzles direct a concentrated heat flow to the work surface; Reflector nozzle disperses heat flow evenly around the whole work surface. (Note: The heat blown out is highly concentrated,Don't use the nozzle for a long time.)
▶【What You Get 】 1 x 1800W Heat Gun, 4 x Nozzles, 1 x User Manual, our worry-free and friendly customer service. Anything happened about the product, please feel free to contact us at any time, we will be always here for you.
Shipping
Fast shipping is very important for us.
Our standard US shipping service is FREE.
Your order will be shipped within 2-3 business days upon full payment received.
Your order will be delivered within 2-3 business days after the handling time.
We only ship to the confirmed Paypal address. We reserve the right to cancel any order for any reason at any time.
We are not responsible for undeliverable addresses.
Returns and payment
We offer a 30 days return policy from checkout winning date.
We allow only PayPal as payment method
FeedBack
Your feedback very important to us, after you get your package and you are
satisfied with our service
please leave us positive feedback
If you have any problem with your order / any questions please before leave any type of feedback
For any questions, using eBay contact system
Please visit our eBay store to check out other items for sale!
Thank you for shopping at our store.