Mini Electric Nozzles Tool Hot Air Gun DIY Embossing Drying Paint uk plug

Description

Description:
Size: body 22cm
Rated power: 300 watts
Rated voltage: 230 volts
Size: body 24cm,
Colors: White, Black
Description: Rated power: 300 watts,
Rated voltage: 230 volts,
Product features: heating tools, which can be used to heat embossed powder and heat shrinkable film.
Instructions:
1. Plug in the power supply and turn on the switch.
2. Keep a distance of 3-5cm from the work and heat it at an angle of about 45 degrees until the work is completed. 3. Turn off the power and wait for it to cool down
Note: The heat gun has a high temperature, so be careful of burns when using it.
You can directly blow hard with a hot air gun to make small soft pottery works.
After baking, use a hot air gun to blow at high temperature for a few minutes, not only can it be hardened but also brightened~~Great!
This hot air gun cannot be adjusted in temperature. Theoretically, the muzzle can reach about 200° within a few seconds.
So when you use it to blow soft pottery, don’t stay in one place for a long time, and don’t blow it for a long time.
Do not stop for more than 3 minutes and then blow again. The angle is about 45 degrees to prevent heat from sucking back.
For those who don’t have an oven or don’t have the conditions to buy an oven, this hot air gun is a great choice!
Package Including:
According to your choice.
On Mar-27-21 at 10:22:08 PDT, seller added the following information: