DIY 300W Heat Gun Hot Air Gun Temperature Shrink Drying Plastic Remove Blower US

Description

iBidBrookly
Welcome to our online store
DIY 300W Heat Gun Hot Air Gun Temperature Shrink Drying Plastic Remove Blower US
Features:
- Heat-up quickly, the maximum temperature can reach 390°F
- With ABS material outside and stainless steel inside
- Micro-circulation cooling system is adopted
- Mini hot air gun is a perfect tool for DIY craft works
- Can be used for embossing powder, heat-shrinkable film, clay, bump, rubber stamp, fast-drying paint, glue, catalytic adhesive bonding, rapid thawing, shrink PVC for packaging, seal wax patterning, DIY handmade soap or candle.
Specifications:
Material: Plastic, Stainless steel
Color: Black + Red
Rated Power: 300W
Rated Voltage: 110V
Plug Type: US plug
Dimensions: 8.7" (L) x 1.7" (D)
Cable Length: 36"
Air Outlet Diameter: 0.5"
Note:
1. Never touch the hot nozzle or melted glue for your sake.
2. Keep out of the reach of children.
3. Do not blow the object directly at 90° with a heat gun,blowing at a 45 degree angle to avoid heat absorption
4. The single use time should not be too long, usually 2-3 minutes. If the temperature of the fuselage rises, please turn off the heat gun and wait for the cooling to use.
5. It is impossible to use industrial applications such as integrated circuits.
Package Includes:
1 X Hot Air Gun
1 X User Manual
Shipping
Item will be sent out by USPS or other carrier accrodingly.
No local pickup.
We reserve the right to change the shipping method without notifying customers.
We have multi-warehouses in NY/CA/KY/TX,so your item may not be sent from the warehouse which stated in the item location.
Payment
We accept PayPal payment only.
Contact&Return
Please send us a eBay message if there is any problem with your order before leaving us a negative feedback/low DSR rating/opening a return case, we will reply within 24 hours.