220V DIY Using Heat Gun Electric Power Tool Hot Air 300W Temperature Gun With Se

Description

220V 300W FIMO hot air gun DIY handmade pottery clay mud Using Heat Gun Electric Power tool hair protruding pink rubber stamp
FIMO Hot air gun, size is about 23cm * 5cm, elegant, comfortable, power of 300 watts; highest temperature can reach 250 degrees -300 degrees.
Black, white two.
Products for: this fimo hot air gun production of diy accessories, such as heating shrink film, convex powder heated Can also be used for other products requiring high-temperature heating Interested parties can contact..!
HOT AIR GUN
model No: LS-300
Rated Voltage: 220v
Rated Frequency: 50-60HZ
Rated Power input: 220V
HOW TO USE THE HEAT TOOL
1.Plug in the heat tool
2.Hold the product as shown on the pict .... Do not touch the hot nozzle
3. Keep 5-6cm distance between the heat tool and item
4.Do not use more than 10 minutes continuosly to prevent overheated
Note: The hot air gun child with caution Please minor children in the safe use of hot air gun under the guidance of an adult to accompany!!!!!!
Heat Gun Boot time not too long, to avoid burn out the machine!!
Listing and template services provided by inkFrog